HD30Z
Manufacturer:
Excetek
Country of Origin:
Taiwan
Short description:
ZNC Small Hole Drilling EDM Machine
basic information
specifications
Images
- ZNC small-hole drilling EDM with 300 × 200 mm X/Y travel and 345 mm Z travel.
- Equipped with a 450 × 210 mm worktable.
- Maximum workpiece size is 660 × 410 × 150 mm, with a maximum workpiece weight of 150 kg.
- Supports electrode diameters from Ø0.3 to Ø3.0 mm, with a maximum electrode length of 400 mm.
- Responsive Z-axis AC servo motor supports stable drilling and depth control.
- Digital readout provides standard three-axis position display.
- Automatic zero-setting functions simplify axis setup and machining-depth monitoring.
- Programmable machining conditions are provided for seven different material types, with additional user-defined conditions available.
- Functions include automatic start, automatic Z-axis zero setting, programmable electrode-wear compensation and automatic Z-axis retraction at the end of machining.
- Inch and metric display modes are supported.
- Standard equipment includes one Ø0.3–Ø3.0 mm electrode chuck, one Ø1.0 mm electrode guide, twenty Ø1.0 mm brass electrode tubes, one work lamp, 80 L stainless-steel water-filter tank, toolbox, one 10 μm paper filter, one 5 μm cartridge filter, two parallel pads and water seals.
- Optional equipment includes Ø3.1–Ø6.0 mm electrode chuck, CE configuration, finish-stop device and air chuck.
The HD30Z provides 300 × 200 mm X/Y travel and 345 mm Z travel. W-axis travel is 0 mm, with 150 mm manual guide travel. The machine is equipped with a 450 × 210 mm worktable.
Supported electrode diameter is Ø0.3–Ø3.0 mm, with a maximum electrode length of 400 mm. Maximum workpiece dimensions are 660 × 410 × 150 mm, and maximum workpiece weight is 150 kg.
Machine weight is approximately 930 kg, and overall machine dimensions are 1450 × 1250 × 2100 mm. Maximum machining current is 48 A, with an input power requirement of 4.0 kVA.
