V650G Plus
Manufacturer:
Excetek
Country of Origin:
Taiwan
Short description:
Submerged Wire-cut EDM Machine
basic information
specifications
Images
- High-performance submerged wire-cut EDM with 650 × 400 mm X/Y travel, 160 × 160 mm U/V travel and 350 / 410 / 500 mm Z travel. Maximum submerged machining height is 310 mm.
- Rigid machine construction uses an FEA-optimized casting, extra-wide machine base and reinforced U/V-axis truss design to improve stiffness and cutting stability.
- Four-sided stainless-steel worktable with hardness of approximately HRC 50.
- A water-cooled lower arm minimizes thermal expansion from heat buildup and supports more stable machining accuracy.
- All five controlled axes use AC servo motors.
- Graphical HMI provides workpiece positioning, maintenance and diagnostic information, machining-data search and other intelligent machining functions.
- Machining technologies include DPM Module, Discharging Stabilizer, advanced corner control, manual radius-size machining, approach-cut wire-mark reduction and micron-finish circuitry.
- Intelligent power management and wire-consumption compensation help reduce running costs and simplify maintenance.
- The optional Automatic Wire Threading (AWT) system supports unattended machining, rethreading directly at the wire-break point and submerged threading without draining the work tank.
- During multi-hole machining, the system can skip a position after a failed rethreading attempt, continue machining and return to the recorded hole later.
- For a 100 mm-thick workpiece, wire annealing/cutting and threading each take approximately 10 seconds. Water-jet threading supports workpieces up to 500 mm thick.
- Standard equipment includes 10 L ion-exchange resin, two paper filters, two diamond guides, two sets of upper/lower flushing nozzles, two energizing plates, one spool of brass wire, one clamping-tool set and one vertical alignment jig.
- Optional equipment includes X/Y-axis linear scales, W-axis, clamping beam, Jumbo Feeder L-50A, Automatic Wire Threading (AWT), double door, 15 kVA AVR, power sliding door, 15 kVA transformer, signal tower, SMS function, remote monitoring system and Super Finish Circuit. The power sliding door is specifically available for the V650G and V850G.
The V650G Plus is a submerged wire-cut EDM designed for workpieces up to 1000 × 700 × 345 mm, with a maximum workpiece weight of 800 kg. Supported wire diameter is 0.15–0.30 mm. X/Y-axis travel is 650 × 400 mm, U/V-axis travel is 160 × 160 mm, and Z-axis travel is 350 / 410 / 500 mm, with a maximum submerged machining height of 310 mm.
The machine controls five axes using AC servo motors and provides a maximum taper angle of ±30° per 100 mm when equipped with the wide diamond guide and nozzle. Overall machine dimensions are 2520 × 2720 × 2290 mm, machine weight is approximately 4400 kg, and water-tank capacity is 850 L.
