HD35Z
Manufacturer:
Excetek
Country of Origin:
Taiwan
Short description:
ZNC Small Hole Drilling EDM Machine
basic information
specifications
Images
- ZNC small-hole drilling EDM with 350 × 250 mm X/Y travel, 350 mm Z travel and 200 mm W travel, plus 150 mm manual guide travel.
- Equipped with a 600 × 300 mm worktable.
- Maximum workpiece size is 810 × 430 × 350 mm, with a maximum workpiece weight of 350 kg.
- Supports electrode diameters from Ø0.3 to Ø3.0 mm, with a maximum electrode length of 400 mm.
- Responsive Z-axis AC servo motor supports stable drilling and depth control.
- Standard three-axis digital readout provides clear position monitoring.
- Automatic axis-zero functions simplify setup and machining-depth control.
- Controller includes pre-programmed machining conditions for seven material types, together with user-defined condition storage.
- Automatic start, programmable electrode-wear compensation and automatic Z-axis retraction help reduce manual operating steps.
- Inch and metric display modes are supported.
- Standard equipment includes one Ø0.3–Ø3.0 mm electrode chuck, one Ø1.0 mm electrode guide, twenty Ø1.0 mm brass electrode tubes, work lamp, 80 L stainless-steel water-filter tank, toolbox, one 10 μm paper filter, one 5 μm cartridge filter, two parallel pads and water seals.
- Optional equipment includes Ø3.1–Ø6.0 mm electrode chuck, CE configuration, finish-stop device and air chuck.
The HD35Z provides 350 × 250 mm X/Y travel, 350 mm Z travel, 200 mm W travel and 150 mm manual guide travel. The machine is equipped with a 600 × 300 mm worktable.
Supported electrode diameter is Ø0.3–Ø3.0 mm, with a maximum electrode length of 400 mm. Maximum workpiece dimensions are 810 × 430 × 350 mm, and maximum workpiece weight is 350 kg.
Machine weight is approximately 1130 kg, and overall machine dimensions are 1520 × 1287 × 2300 mm. Maximum machining current is 48 A, with an input power requirement of 4.0 kVA.
